Matt Barker asked:


Along with the kitchen, the bathroom is one of the key rooms people pay attention to when buying a house. If you’ve decided to renovate, then it’s important to get it right.

Designers Colin McAllister and Justin Ryan suggest a bathroom should be designed with two considerations in mind:

Convenience – It should provide an efficient place for washing, hairstyling, and make-up. You should be able to get in and get out, and find everything in its place. The bathroom is a haven for germs, so it should be easy to clean as well.

Comfort – A bathroom is not just for quick fix-ups before work, but a place to de-stress as well. It should provide a comfortable atmosphere; a quiet place to get away from it all.

Here are some of the key things to avoid when renovating a bathroom:

Carpet: Never put carpeting in a bathroom. It retains moisture, germs, and is difficult to keep clean. If you want warmth under your feet, install heated flooring.

Bright walls: Gaudy, brightly colored walls, though well intentioned, are just eyesores. Keep bathroom walls white or ivory, and add color with accenting tiles and accessories.

Cheap laminate flooring: There are laminates and then there are laminates. The really cheap flooring looks similar to the expensive brands, but is no more than compressed chip board with a wood pattern on top; just add water and watch it expand! Spend the money and purchase moisture resistant brands such as bamboo, teak, or opt for tile flooring.

Keep toiletries out of sight: No one needs to see your collection of prescriptions and jars of salve. Get baskets to store those items out of sight and keep the counter clean and free of cosmetics and other paraphernalia.

Wallpaper: Although moisture resistant products are more common, even expensive, good quality wallpaper can peel when subjected to humidity on a daily basis. It also takes away from the clean look that is obtained from a bathroom friendly paint.

Wood Pellet Stove And Boiler Guide

Shailesh Smith asked:


Stylish and affordable are the two terms which aptly describe the whole new range of coyote spas and hot tubs. Designed with a cutting edge technology and brimming with a whole range of innovative features, coyote spas come at a quality, reliability and a price which enables one to take the plunge quite easily.

Without compromising even a wee bit on technology or reliability, coyote spas and hot tubs are perfect for those who can’t afford to spend a fortune. Manufactured in the same factory with same construction methods applied to other spas and hot tubs, they will always end up giving a client a complete peace of mind.

Advantages and Features

Well-engineered, stylish and innovative, all spas and hot tubs have an inward-facing design which makes them a great choice for enjoying a convivial and relaxing atmosphere with friends and family. Manufactured with an immaculate craftsmanship and quality, all coyote spas will be above your expectations and are available at a price which will definitely suit those with a smaller budget.

Maintenance

Electrical equipment components are a major installation in Coyote Spas. They warrant special attention as they consist factory installed ozone system, pumps, air therapy system, heater and a control system to guard against malfunction. Generally this period stretches up to three years from the original date of delivery and protects the tub from all types of defects in materials and workmanship.

Features Galore

Highly cost-effective for household budgets

Changing Environment makes coyote Spas a preferred choice

Growing families mean larger seating areas; therefore coyote spas are always ideal

Water treatment technology for hectic schedules leads to time saving

For any landscape or personal style, customised coyote exterior designs go very well

Arctic Spas Online is a premier manufacturer of Coyote spas and hot tubs. It offers its clients a vast variety of hot tubs and spas which will enable you loved ones to unwind and relax in a serene yet calm surrounding.

Wood Pellet Stove And Boiler Guide

submit111@gmail.com asked:


Raring to start working on your own ceramic floor tile project? Get ready to learn the basics of how to lay ceramic floor tile right here and make that beautiful ceramic tile floor that you and your family have always wanted! So, get your tiling tools ready, put on your safety goggles and let’s do some tiling!

Most tiling jobs start with a well-prepared subfloor. As you learn more about how to lay ceramic floor tile, you will find out about the three general types of floors that tile installers may often work with. Such information will help you alot along the way.

Generally, you will encounter three types of subfloors: Vinyl, plywood, and the concrete floors. Installing ceramic tile directly to vinyl or linoleum floors (or subfloor surfaces) should be avoided at all cost. Your vinyl or linoleum flooring may contain asbestos fibers and should be tested first before you try removing it. If your vinyl floor covering does not contain asbestos fibers, a general recommendation on how to lay ceramic floor tile is to rough-sand, or scarify, the vinyl floor surface to provide your tiling mortar a better grip. Use a latex modified thinset mortar to install your ceramic tiles over your vinyl subfloor.

Working over plywood subfloors can be very tricky, as well. Like vinyl floor surfaces, it is not advisable to install your ceramic tiles directly on to your plywood floor surface. Plywood flooring usually has a smooth surface, and easily warps when exposed to heat or moisture. Be sure that the wood is at least 1 and 1/8 inches thick and is reinforced and supported by an equally strong underlayment. Otherwise, your ceramic tiles will dislodge easily, or worse, break and need replacing. Plywood panel edges must be installed about one-fourth of an inch away from perimeter walls and door jambs, and fixtures and cabinetry. These are expansion gaps and should not be bridged with tiling mortar. To prevent moisture from damaging the plywood subfloor, use a waterproofing sealant or caulk over your plywood subsurface.

Concrete floors are the most ideal subfloor surface to work with. But before you start tiling over the subfloor surface, it must be cleaned thoroughly. Paint, adhesives, fillers or levelers, sealers, and chemically treated cement substrates are unsuitable surfaces fpr ceramic tile installations. Remove these by using non-chemical methods. For dust and other debris, sweep and then mop your concrete subfloor surface using only clean water. Allow the surface completely before you start working on it. Generally, smooth concrete surfaces are difficult to work with as the tiling mortar may not grip and hold. Consequently, your ceramic floor tiles may be in danger in dislodging. Smooth concrete surfaces must be rough sanded, scarified, or etched to allow the tiling mortar some grip.

Another important aspect about how to lay ceramic floor tile is to always check for cracks and debris. Repair as many of the cracks as you can. If you see cracks that are too large to repair, replace the floor section where they are found with new concrete. Concrete may need to set (or dry) for at least twenty-four hours before you can start tiling over it. Lastly, get out your carpenter’s level and check for any dips or humps on the concrete subfloor surface. If you find any, you may use a cement-based floor level to fill in the dips and smoothen over the humps. This will help to keep your finished ceramic tile floor level and minimize dislodging, or tile breakage.

Let it dry or set properly. This is the key step you need to keep in mind about how to lay ceramic floor tile flooring. There are three setting periods: The first is right after you have placed your ceramic tiles with thin set mortar and bonded them to your subfloor. The second is after after putting in your tiling grout (before putting on the sealant). These setting periods last overnight, at the very least, to twenty-four hours, at the most. Your sealant has dried, you are done!

So when you work on your own ceramic tile project, always remember how to lay ceramic floor tile properly by knowing how to work with your subfloor surfaces. Learning how to lay ceramic floor tile is also both a great way both to learn a new hobby, and a home improvement skill. Just remember to keep a safe working environment, not to rush things (especially during setting periods), and try to work with at buddy. Better yet, get your friends over and help.

Wood Pellet Production Guide

Shailesh Smith asked:


Owning a Hot Tub/Spa is the best investment for you and your family’s health. The Spa is the perfect place for relaxation after an exhausting day. The Spa is good for family recreation and individual relaxation. The best thing about the Hot Tub is it can be placed anywhere (in the garden, backyard or on decking) you need it. It helps release pain, stress and tiredness. Hydrotherapy in Spa strengthens blood circulation, improves skin tones decreases blood pressure and stimulates immune system. If you have got your own hot tub then ensure that you get the maximum usage and pleasure of it all year round. There are various accessories available for the hot tubs which will make your cedar hot tub experience more entertaining. One of them is Hot Tub Gazebos. Here is the some information about the hot tub gazebos. Hot Tub Gazebos adds style to hot tubs and create a wonderful outdoor setting. It makes hot tub enticing. Hot Tub Gazebos are available in various dimensions and models like Hexagon Gazebos, Octagon Gazebos, Square Gazebos and all season gazebos. By investing in hot tub gazebos you can use your cedar hot tub even in the raining season. It allows free circulation of air so that you don’t overheat. You have a choice of either a Wooden Gazebo (fully enclosed room) or Lattice Open Gazebo. Wooden Gazebos are more functional as it can also be used as an outside dining shelter. The Arctic Spas Edmonton provides the exclusive range of Hot Tub Gazebos at competitive prices. The website provides quality products and is dedicated to its valued clients. We always move an extra mile to provide the excellent customer service and satisfaction. We also provide other Spa accessories. The website is crammed with as much information possible on Hot Tub Gazebos.

Wood Pellet Production Guide